MC33178、MC33179、低功率、低噪聲運算放大器,ON Semiconductor
ON Semiconductor MC33178/9 系列的運算放大器使用雙極技術,用于高質量音頻和數據信號處理應用。
它們使用高頻 PNP 輸入晶體管產生低輸入偏置電壓、低噪音和低失真的放大器。
它們還提供高輸出電流驅動能力,同時每個放大器消耗僅 420 μA 漏極電流。 提供采用 DIP 和 SOIC 封裝的雙路和四路型號。
600 W 輸出驅動能力
大輸出電壓擺幅
低偏置電壓:0.15 mV(平均值)
低總諧波畸變:0.0024%(@ 1 kHz、600 W 負載時)
高增益帶寬:5 MHz
高轉換速率:2 V/μs
雙電源操作:±2 V 至 ±18 V
輸入上的靜電放電鉗位
### 運算放大器,ON Semiconductor
查看全部
MC33178PG 產品概述
The MC33178/9 series is a family of high quality monolithic amplifiers employing Bipolar technology with innovative high performance concepts for quality audio and data signal processing applications. This device family incorporates the use of high frequency PNP input transistors to produce amplifiers exhibiting low input offset voltage, noise and distortion. In addition, the amplifier provides high output current drive capability while consuming only 420A of drain current per amplifier. The NPN output stage used, exhibits no deadband crossover distortion, large output voltage swing, excellent phase and gain margins, low open?loop high frequency output impedance, symmetrical source and sink AC frequency performance.
Features
?600 ? Output Drive Capability
?Large Output Voltage Swing
?Low Offset Voltage: 0.15 mV (Mean)
?Low T.C. of Input Offset Voltage: 2.0 V/°C
?Low Total Harmonic Distortion: 0.0024% (@ 1.0 kHz w/600? Load)
?High Gain Bandwidth: 5.0 MHz
?High Slew Rate: 2.0 V/s
?Dual Supply Operation: ±2.0 V to ±18 V
?ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Performance
?Pb?Free Packages are Available
查看全部
MC33178DG 產品概述
MC33178、MC33179、低功率、低噪聲運算放大器,ON Semiconductor
ON Semiconductor MC33178/9 系列的運算放大器使用雙極技術,用于高質量音頻和數據信號處理應用。
它們使用高頻 PNP 輸入晶體管產生低輸入偏置電壓、低噪音和低失真的放大器。
它們還提供高輸出電流驅動能力,同時每個放大器消耗僅 420 μA 漏極電流。 提供采用 DIP 和 SOIC 封裝的雙路和四路型號。
600 W 輸出驅動能力
大輸出電壓擺幅
低偏置電壓:0.15 mV(平均值)
低總諧波畸變:0.0024%(@ 1 kHz、600 W 負載時)
高增益帶寬:5 MHz
高轉換速率:2 V/μs
雙電源操作:±2 V 至 ±18 V
輸入上的靜電放電鉗位
### 運算放大器,ON Semiconductor